| ○種別 (必須): | □ | 学術論文 (審査論文)
| [継承] |
| ○言語 (必須): | □ | 英語
| [継承] |
| ○招待 (推奨): |
| ○審査 (推奨): |
| ○カテゴリ (推奨): |
| ○共著種別 (推奨): |
| ○学究種別 (推奨): |
| ○組織 (推奨): |
| ○著者 (必須): | 1. | 重光 亨 ([徳島大学.大学院社会産業理工学研究部.理工学域.機械科学系.エネルギーシステム分野]/[徳島大学.理工学部.理工学科.機械科学コース.エネルギーシステム講座])
| ○役割 (任意): |
| ○貢献度 (任意): |
| ○学籍番号 (推奨): |
| [継承] |
| 2. | 福富 純一郎
| ○役割 (任意): |
| ○貢献度 (任意): |
| ○学籍番号 (推奨): |
| [継承] |
| 3. | (英) Toyohara Masaaki (日) (読)
| ○役割 (任意): |
| ○貢献度 (任意): |
| ○学籍番号 (推奨): |
| [継承] |
| ○題名 (必須): | □ | (英) Performance and Flow Condition of Cross-Flow Wind Turbine with a Symmetrical Casing Having Side Boards (日)
| [継承] |
| ○副題 (任意): |
| ○要約 (任意): | □ | (英) A cross-flow wind turbine has a high torque coefficient at a low tip speed ratio. Therefore, it is a good candidate for use as a self-starting turbine. Furthermore, it has low noise and excellent stability; therefore, it has attracted attention from the viewpoint of applications as a small wind turbine for an urban district. However, its maximum power coefficient is extremely low (10 %) as compared to that of other small wind turbines. In order to improve the performance and flow condition of the cross-flow rotor, the symmetrical casing with a nozzle and a diffuser are proposed and the experimental research with the symmetrical casing is conducted. The maximum power coefficient is obtained as Cpmax = 0.17 in the case with the casing and Cpmax=0.098 in the case without the casing. In the present study, the power characteristics of the cross-flow rotor and those of the symmetrical casing with the nozzle and diffuser are investigated. Then, the performance and internal flow patterns of the cross-flow wind turbine with the symmetrical casings are clarified. After that, the effect of the side boards set on the symmetrical casing is discussed on the basis of the analysis results. (日)
| [継承] |
| ○キーワード (推奨): | 1. | (英) Cross-flow wind turbine (日) (読)
| [継承] |
| 2. | (英) Power coefficient (日) (読)
| [継承] |
| 3. | (英) Torque coefficient (日) (読)
| [継承] |
| 4. | (英) Symmetrical casing (日) (読)
| [継承] |
| 5. | (英) Numerical analysis (日) (読)
| [継承] |
| ○発行所 (推奨): | □ | (英) Turbomachinery Society of Japan, Korean Fluid Machinery Association, Chinese Society of Engineering Thermophysics, IAHR (日) ターボ機械協会，韓国流体機械学会，中国工程熱物理学会，国際水理学会 (読)
| [継承] |
| ○誌名 (必須): | □ | International Journal of Fluid Machinery and Systems ([ターボ機械協会]/韓国流体機械学会/中国工程熱物理学会/[国際水理学会])
(eISSN: 1882-9554)
| ○ISSN (任意): | □ | 1882-9554
ISSN: 1882-9554
(eISSN: 1882-9554) Title: International Journal of Fluid Machinery and SystemsSupplier: ターボ機械協会，韓国流体機械学会，中国工程熱物理学会，国際水理学会Publisher: Turbomachinery Society of Japan (J-STAGE)
(Scopus)
(CrossRef)
(Scopus information is found. [need login]) | [継承] |
| [継承] |
| ○巻 (必須): | □ | 9
| [継承] |
| ○号 (必須): | □ | 2
| [継承] |
| ○頁 (必須): | □ | 169 174
| [継承] |
| ○都市 (任意): |
| ○年月日 (必須): | □ | 西暦 2016年 6月 15日 (平成 28年 6月 15日)
| [継承] |
| ○URL (任意): | □ | http://ci.nii.ac.jp/naid/130005159041/
| [継承] |
| ○DOI (任意): | □ | 10.5293/IJFMS.2016.9.2.169 (→Scopusで検索)
| [継承] |
| ○PMID (任意): |
| ○CRID (任意): | □ | 1390282680274013568
| [継承] |
| ○NAID : | □ | 130005159041
| [継承] |
| ○Scopus (任意): |
| ○researchmap (任意): |
| ○評価値 (任意): |
| ○被引用数 (任意): |
| ○指導教員 (推奨): |
| ○備考 (任意): |