『徳島大学 教育・研究者情報データベース (EDB)』---[学外] /
ID: Pass:

登録内容 (EID=162270)

EID=162270EID:162270, Map:0, LastModified:2014年1月20日(月) 13:31:37, Operator:[三木 ちひろ], Avail:TRUE, Censor:0, Owner:[田島 登誉子], Read:継承, Write:継承, Delete:継承.
種別 (必須): 学術論文 (審査論文) [継承]
言語 (必須): 英語 [継承]
招待 (推奨):
審査 (推奨):
カテゴリ (推奨):
共著種別 (推奨):
学究種別 (推奨):
組織 (推奨):
著者 (必須): 1.西川 啓介
役割 (任意):
貢献度 (任意):
学籍番号 (推奨):
[継承]
2.薩摩 登誉子 ([徳島大学.病院.診療科.歯科.かみあわせ補綴科(第二補綴科)]/->個人[田島 登誉子])
役割 (任意):
貢献度 (任意):
学籍番号 (推奨):
[継承]
3.重本 修伺
役割 (任意):
貢献度 (任意):
学籍番号 (推奨):
[継承]
4.坂東 永一
役割 (任意):
貢献度 (任意):
学籍番号 (推奨):
[継承]
5.中野 雅德
役割 (任意):
貢献度 (任意):
学籍番号 (推奨):
[継承]
6. (英) Ishida Osamu (日) 石田 修 (読) いしだ おさむ
役割 (任意):
貢献度 (任意):
学籍番号 (推奨):
[継承]
題名 (必須): (英) Development of a novel articulator that reproduced jaw movement with six-degree-of-freedom  (日)    [継承]
副題 (任意):
要約 (任意): (英) A novel robotic articulator that reproduced a six-degree-of-freedom jaw movement was developed and tested. A precise six-axis micro-positioning stage was employed for this articulator. A high-resolution jaw-tracking device measured the functional jaw movement of the patient and a six-axis micro-positioning stage reproduced recorded jaw movement data. A full veneer crown restoration was fabricated with this articulator system. A working cast was mounted on the positioning stage of the articulator. An occlusal table with soft wax was attached on the cast tooth die, and the jaw movements were reproduced to create a functionally generated path on the occlusal table. The finished occlusal record was used to obtain the wax pattern for the crown. In this subject, no intra-oral occlusal adjustment was necessary for setting the finished full veneer crown. Since this articulator could perform a precise reproduction of the dynamic jaw motion during the functional jaw movement, this system has potential to improve accuracy of the prosthetic teeth occlusion.  (日)    [継承]
キーワード (推奨): 1. (英) condylar (日) (読) [継承]
2.顎運動 (jaw motion/->キーワード[顎運動]) [継承]
3.顎口腔機能 (stomatognathic function) [継承]
発行所 (推奨): Elsevier (->組織[Elsevier Science]) [継承]
誌名 (必須): Medical Engineering & Physics (Institute of Physics and Engineering in Medicine)
(pISSN: 1350-4533, eISSN: 1873-4030)

ISSN (任意): 1350-4533
ISSN: 1350-4533 (pISSN: 1350-4533, eISSN: 1873-4030)
Title: Medical engineering & physics
Title(ISO): Med Eng Phys
Publisher: Elsevier BV
 (NLM Catalog  (Scopus  (CrossRef (Scopus information is found. [need login])
[継承]
[継承]
(必須): 29 [継承]
(必須): 5 [継承]
(必須): 615 619 [継承]
都市 (任意):
年月日 (必須): 西暦 2007年 0月 初日 (平成 19年 0月 初日) [継承]
URL (任意):
DOI (任意): 10.1016/j.medengphy.2006.07.007    (→Scopusで検索) [継承]
PMID (任意): 17027315    (→Scopusで検索) [継承]
NAID (任意):
WOS (任意): 000244967000009 [継承]
Scopus (任意):
評価値 (任意):
被引用数 (任意):
指導教員 (推奨):
備考 (任意): 1.(英) Article.Affiliation: Department of Fixed Prosthodontics, Institute of Health Biosciences, The University of Tokushima Graduate School, Tokushima 770-8504, Japan. keisuke@dent.tokushima-u.ac.jp  (日)    [継承]
2.(英) Article.PublicationTypeList.PublicationType: Evaluation Studies  (日)    [継承]
3.(英) Article.PublicationTypeList.PublicationType: Journal Article  (日)    [継承]

標準的な表示

和文冊子 ● Keisuke Nishigawa, Toyoko Satsuma, Shuji Shigemoto, Eiichi Bando, Masanori Nakano and Osamu Ishida : Development of a novel articulator that reproduced jaw movement with six-degree-of-freedom, Medical Engineering & Physics, Vol.29, No.5, 615-619, 2007.
欧文冊子 ● Keisuke Nishigawa, Toyoko Satsuma, Shuji Shigemoto, Eiichi Bando, Masanori Nakano and Osamu Ishida : Development of a novel articulator that reproduced jaw movement with six-degree-of-freedom, Medical Engineering & Physics, Vol.29, No.5, 615-619, 2007.

関連情報

Number of session users = 0, LA = 0.84, Max(EID) = 372224, Max(EOID) = 995004.